Women's Tips

How to make an original shelf for flowers?

Pin
Send
Share
Send
Send


Breeding flowers, for most housewives, is a very exciting experience. A small hobby gradually develops into a big hobby, filling in all the free space. Well if the living space allows you to select the necessary territory to create a green oasis. But what to do with this sprout, which has no place on the windowsill, is also not put on the cabinet, the table is busy, and on the floor among the large flowerpots it will simply be lost.

The solution of such a global problem is the floor and wall versions of the shelves. The modern market offers a wide range of finished designs. The variety of shapes, structures and colors is amazing and has no boundaries. However, hand-made, flower shelves become a unique design decision and bring an unusual atmosphere to the interior.

Variety of solutions and materials

Before taking up work, it is necessary to create an approximate plan for the arrangement of colors, on the basis of which the dimensions and features of future shelves will be determined. Depending on the type of plant, two main options are used:

The number of flowerpots located on selected structures also divides them into several types:

  • Single. In most cases, they are used as a wall, they look very beautiful small, densely flowering bushes or curly dense greens.
  • Doubles. For them it is better to pick flowers with the same conditions for the care. Can be wall and floor, for the second option more suitable large tree plants.
  • Multisite. Shelves occupy a certain section of the wall, the main thing is not to put very heavy pots, to prevent falling, in the floor version you can arrange up to ten vases.

All the proposed options can be designed in the form of corner shelves, so you get space savings and additional opportunities for design innovations. Lovers of lianas plants are offered to consider ceiling shelves.

For a hand-made invention of flower racks, you can select and combine a wide variety of materials. Very often, many opt for a tree. Despite the environmental friendliness and versatility in use, do not forget that you can always find other interesting options that have their own advantages. Some of them we consider in more detail.

Plywood shelves

Plywood is perhaps the simplest and cheapest material from which flower shelves of various shapes and sizes are obtained. If a plywood sheet was not found in the house, a small amount of funds will be spent on its acquisition. The process of creating a shelf of plywood is not complicated. With the necessary tools, the task at hand will quickly become a work of art.

At the beginning, you need to make a sketch. Here you can show unlimited imagination. The main thing is that the resulting construction would correspond to the initial purpose, be durable and withstand the planned number of pots.

Further measurements are made and the main drawing is made, which is transferred to the plywood sheet. Following the contours of the printed pattern, the product is cut out using a jigsaw.

When the fabric is ready, the edges of the cut are cleaned with sandpaper and holes are made for future fastening. The entire surface is covered with a special solution, thereby increasing moisture resistance and preventing the appearance of mold. After drying, the shelf is opened with varnish.

Creative people can demonstrate their talents by decorating the product with drawings, glue them with pebbles or shells, show creativity.

To fix the wall options for plywood shelves use metal corners or staples, due to which they are mounted directly on the wall.

Plastic shelving

The most frequent place the placement of flowers in the room - windowsill. Using such a plastic canvas, flower racks are created. It can be purchased at almost any hardware store or ordered at the manufacturer’s factory.

For the construction, you will need several nickel-plated pipes, fasteners, flanges for fastening to the floor and a pair of brackets, do not forget about the necessary tools for work.

After the measurements made, make a cut of the window sill to the desired length. The next step is drilling holes for pipes, two at the edges, it is important that they are parallel to each other, and one in the center. The length of the pipes must be the same, otherwise the structure will be unreliable and shaky. The assembled rack is fixed with the help of ceiling brackets and floor flanges.

The advantages of plastic shelving is durability, they are not afraid of moisture, they are easy to care for.

Corner flower shelves

To create an angular shelf, you can use all the materials specified here. For small products there will be enough remnants of materials.

The technology of creating corner shelves with their own hands is very simple. The surface is cut from the chipboard sheet. A galvanized pipe is pushed into the prepared holes and the whole invention is interconnected by flanges. With the help of brackets fixed on the selected surface.

The next stage is the treatment with varnish or paint.

To create a green corner, an interesting solution would be a kind of corner shelving. As the shelves increase, they decrease, representing a pyramid. On this design, you can arrange flowers of different sizes with the use of climbers on the sides.

Wood flower shelves

Wood is one of the most reliable materials used in construction. Properly assembled and secured wooden shelves or shelves adapt to any number of plants, regardless of size. In the choice of wall wooden shelves, it can be limited to the simplest option. To do this, take the required length of the beam, varnish or paint and fasten with metal corners to the wall. If you replace the fasteners with leather straps, you get a creative design approach that brings personality.

For plants in large pots make wooden floor racks. They withstand a lot of weight, allowing you to combine different types of colors.

From scraps, even if of unequal length, the corner shelf is easily assembled. Flowering bushes diversify the boring life of the corners, with its bright colors.

For lovers of unusual options are offered to consider wooden shelves, combining several different materials.

The method of assembly of wooden shelves or racks is the same as in the version with plywood.

Wall shelf for flowers from wood and metal

Combining materials for flower shelves, we advise you to choose a metal-wood combination. The welded metal frame with wooden flooring is used for wall types of shelves and fits very harmoniously into the modern interior.

For manufacturing, you will need a drawing with measurements, several rods, which will later form the basis of the shelf, and a wooden plank for the partition. After welding the main part, it must be treated with an anti-corrosion solution and painted in the selected color. Next, set the prepared wooden plank, the finished product, is mounted on the wall with screws.

Considering this combination of materials in the outdoor versions of flower racks, the main work is carried out according to the same plan. Preference is given to options in several tiers, and forged flower stands will appeal to lovers of sophistication.

Glass flower shelves

The main location of the glass shelves usually falls in the window space. On such shelves all plants will receive the necessary portion of light. Preparing for work, it is necessary to choose the right glass thickness. The best option is 0.5 cm. Having strengthened the lower part with a tree, such a construction will easily withstand up to ten small pots of flowers.

If handling a glass cutter causes some difficulties, it is better to seek help from knowledgeable craftsmen. Having provided the necessary sizes, they with ease will execute your task.

In addition to the glass, you will need iron corners, with the help of which the slats are mounted. On top of the rails put shelves.

Equally important is attached to the correct location of flower shelves and shelves. Observing a series of simple tips, harmony is achieved between the green space and the atmosphere of housing:

  1. If decorative flowers prevail in the flower variety, it is better to use a wide floor shelving. Its height should not exceed the middle of the height of the room, otherwise it will result in visual distortion of space.
  2. Positioning the flowers on the tiered stands, we use the rule from larger to smaller. On the lower floors are lush bushes more voluminous, and gradually create a transition to miniature options.
  3. Creating a flower stand with their own hands, special attention should be paid to the supports. Large vases require a strong and stable construction, especially if there are small children or animals in the house.
  4. A large number of plants located in the neighborhood on the same shelf should have the same conditions for care.
  5. Make a difference by inventing interesting ideas and adding small accents. Any snag at an extraordinary approach, with the addition of artificial accessories in the form of butterflies or bugs, will turn into a masterpiece.

The use of flower shelves is not limited to the inside of the premises. Houses, apartments with balconies or loggias accommodate entire greenhouses. The owners of household plots create incredible compositions on the territory. Renovated ladders, bicycles and wheelbarrows are used as shelves. Hanging shelf can serve as teapots, watering cans and other old utensils. Such green corners become one with the owners, and the shelves and shelves for plants, designed with his own hands, are an integral part of a small floral paradise.

What are they like?

All shelves for flowers can be divided into floor and wall. The first ones are more reliable and durable, but their placement requires additional space. Wall seats do not occupy the place, but, if improperly fastened, can be fragile and unreliable. In addition, they are unlikely to be able to place large and heavy pots with spreading plants.

What can you do?

In general, materials such as wood, metal, plastic, or glass are commonly used to make shelves. The most convenient way to work with wood is that not everyone can cut glass or metal on their own. And at home, such an object can be made practically from improvised and sometimes unnecessary things.

How to make?

So, how to make a shelf for flowers with your own hands? Below are some interesting ideas.

You can make an interesting floor shelf of the old stairs. But be prepared for the fact that it will take a lot of space.

For manufacturing will require:

  • old waste stairs
  • plywood,
  • electric jigsaw,
  • varnish or paint
  • roulette,
  • nails (not too long).

  1. The old ladder needs to be laid out and varnished or painted.
  2. Now measure the distance between the pair of steps, located on different sides, but on the same level. Take measurements from distant edges. Also measure the length of each step.
  3. Now transfer measurements to plywood. You will have several rectangles of different sizes. They need to cut using jigsaw.
  4. Now the parts should be varnished or painted.
  5. Next, place each rectangle on the appropriate steps and nail it. If desired, can be used for mounting and screws. But it is advisable to try so that they do not go beyond the steps below, this will spoil the appearance of the whole structure.
  6. Shelf ready!

For the manufacture of this shelf, which is hung on the wall, you will need a drill, jigsaw, tape measure, plywood, rope, or a rather thick and very strong rope, screws and a screwdriver, glue and unnecessary wide rings from the eaves.

Description of the manufacturing process:

  1. First you need to cut several rectangles of the same size.
  2. Now in their corners, make holes that coincide in diameter with a rope or rope. Make sure that they are in all the boards are the same.
  3. Next, thread ropes or ropes (only 4 segments are required) into the first shelf (the lowest one), tie the ends into knots. For reliability, it is desirable to fix them with glue.
  4. Put on the rope a few rings, they will serve as decorative elements.
  5. Now, after about 20-30 centimeters (everything will depend on the size of the flowers), make another node. But they should be located at equal distances. Also secure the knots with glue.
  6. Put on the second shelf. Then string the cornice rings. If there are three shelves, tie another knot on the rope (also at equal distances).
  7. Position the structure against the wall, connect the ends of the rope to the sides, glue them together and cut off the excess, and fasten the shelf in the wall directly in these joints with self-tapping screws.

An interesting shelf for a garden or a garden can be made of wood, or rather of old hemp. For production you will need:

  • 9 hemp (it is advisable to use stumps of the same size so that there are no difficulties when they are connected to each other),
  • sanding machine or sandpaper,
  • varnish or paint
  • wooden pins (they are usually used when collecting furniture),
  • drill,
  • chalk or marker,
  • glue for wood (super strong).

  1. First you need to prepare hemp. To do this, polish them with a typewriter or abrasive paper. But you only need to process cuts, do not touch the natural texture of the tree, it will add some flavor to the shelf. If desired, the stumps can be varnished or painted (you can paint only sections or the entire surface).
  2. Now take the first five stumps and place them side by side, placing them in a circle.
  3. Mark the points of contact with a marker or chalk.
  4. Next, take the first two hemp. First you need to fix them. Prepare the pin and drill through each stump one deaf hole (diameter will be equal to the diameter of the pin) in the marked places. Next, grease the pin with glue, place it in one hole and place another stump next to it, so that the end of the pin is in its recess.
  5. In the same way (that is, with glue and pins), connect all five stumps in a circle.
  6. Now, over the connected stumps, install new ones, also placing them next to each other. First fix the entire structure using a drill, pins and glue. Then place it on the first floor and fix with glue.
  7. Glue the last stump to the second floor so that it is located in the middle.
  8. Done! In the photo, such a multi-tiered shelf looks very original.

Make a wall miniature shelf. To do this, you will need one wide board or plywood, jigsaw, tape measure, pencil and ruler, one long strap or two short, glue and screws for fastening.

  1. First, determine the size and jigsaw cut shelf required size, pre-inflicted on the board or plywood drawing.
  2. Now it will be necessary to make simple calculations, namely, to find the hypotenuse of a right-angled triangle, the legs of which will be the width of the shelf and a section of wall from the shelf to the mount. To do this, put these two values ​​in a square and add, and then from the amount obtained, extract the square. Sum up all three values, that is, obtained during the calculations and two legs (shelf width and distance from it to the mount) and add 2-3 centimeters. Measure the resulting number on a belt and cut it off. This section will be used for fastening.
  3. If the shelf is not long, then you will need two mounts, and if it is long, then it is better to use three.
  4. Now glue the ends of the strap lengths with the wrong sides. Insert the shelf into the hinges and position it so that when fastened to the wall it is placed vertically.
  5. Glue the strap to the shelf at the points of contact.
  6. Next, attach the shelf to the wall with screws at the joints of the ends of the belt.

How to make ready shelf?

Making a shelf is only half the battle, because in order for this item to be original and interesting and harmoniously fit into the interior, you need to develop its design.

Some interesting ways to decorate:

  • Stickers, both ordinary and vinyl.
  • Paint. You can create interesting patterns and drawings.
  • Old finishing materials, for example, wallpaper.
  • The cloth. It can be used as upholstery.

Getting down to assembling a wooden structure

Wooden shelf

It will be very good if you have about 6 pieces of these wooden planks, and not less than two meters high and the size at the end of 35 × 5 mm. Another need two bars 20 × 20 mm, too, 2 meters high.

Arm yourself with a pencil, screwdriver (cross-shaped) or a screwdriver, tape measure, saw and jigsaw, as well as 25 and 40 mm self-tapping screws. Также вам не обойтись без помощника, который просто будет поддерживать конструкцию при монтировании полок к стойкам. Теперь можно приступать к изготовлению.

  • Деревянные планки под полки нарезаются по 60 см (12 шт.) и 64 см (6 шт.) и, в общем, мы получаем 18 небольших планок – это будущие полки.
  • Бруски режутся по 70 см и получается 4 штуки – это будут боковые стойки.
  • Из остатков брусков выпиливаем еще шесть небольших брусков: четыре по 23 см и два по 19 см. This is the future shelf rack.
  • On the bars that will serve as racks, we use a pencil for marking the two lower shelves. The marking is done with the calculation of the height of the flowers themselves in the pots that we plan to place on them.
  • With the help of four bars (23 cm) we make two shelves. At both ends of the slats with screws 25 mm across, bars are fastened, which in turn connect the slats to each other.
  • Self-tapping 70 mm screws fasten the shelves to the vertical racks.
  • Using the same screws, to the upper parts of the rack between each pair of vertical posts we fix internal bars of 19 cm in size.
  • The third shelf is manufactured locally by attaching each strip to the top of the product with 25 mm self-tapping screws.

Here such small floor shelf or a rack for flowers turned out.

Chipboard shelves

If you prefer the regiment of chipboard, then surely you have experience with this material. There will have to tinker not so much with the manufacture of the design itself, as with the preparatory work before assembly. You will need:

  1. Chipboard: billet size 140 × 200 mm (the best - waste pieces from one sheet, although it does not matter)
  2. Fasteners (confirmats, screws - 2 pieces for 45 mm and 6 pieces for 16 mm).
  3. Drill for confirmatories and ordinary drill.
  4. Hinged slats or roofs.
  5. Edge.
  6. Chopi made of wood (dowels).
  7. PVA glue.

  1. Iron.
  2. Hammer.
  3. Device for pasting edge (usual bar with a groove slightly more than 16 mm).
  4. A wooden block wrapped in sandpaper.
  5. Clamp.

As you can see, the list is considerable, and all this is necessary to prepare for the assembly.

First of all, we determine which ends of the parts will be visible, after which we begin to glue them over. We use for this the usual household iron and shoemaker knife for trimming the excess edge. Using a special device, smoothly smooth the glued melamine edge and grind the end corners with an emery board. Those places that will dock with each other, you should not paste over.

Pasting workpiece edge

Elements of the back base for future shelves, which we have not pasted over with paper edge, are being prepared for joining with each other. We drill two shallow holes and pour glue into them. We drive chopies (dowels) into the holes, and in the joined part of the neighboring element we also drill two holes and fill them with glue.

Install shkanty

To chopik coincided with the holes of the neighboring element, use special "jigs" or furniture taps for dowels. "Conductors" are worn on the dowels and pressed against the mating parts, sharp taps will inevitably leave small grooves. Drill there.

Connection method

Connect the parts together and firmly pressed. For this, the clamp is an indispensable tool for us. Tightly clamp the clamp parts and leave to dry completely.

Clamp clamp

The back of the shelves is made. Now our task is to secure the shelves. To do this, we first make markup for confirmats.

Confirmat drill and confirmat

Using a special confirming drill, we drill holes, then proceed to the mounting of the shelves, alternating them to the right and left.

It is best to mount the hinged strips from above and below so that the shelf hangs on the wall strictly vertically, even if someone accidentally touches it.

Chipboard shelves

It remains to beautifully arrange the flowers and you can enjoy the work of their hands.

You can fantasize and make the shelves multi-colored. Or another option: round the free corners of the shelves and upholster them with a T-shaped plastic edge. It will be much more beautiful.

Hinged corner shelf for flowers

Now it's time to talk about the corner shelves for flowers.

Sometimes the place for flowers is only in the corner, therefore, we need a corner shelf. This can be either a bookcase or a wall shelf. Everything is simple, as mentioned above, the main thing is to prepare everything correctly. For example, if we want to make an corner stack of chipboard with elements of chrome-plated pipes, then we will need:

  1. 4 squares chipboard required size.
  2. T-shaped edge (can be the color of the product, although it is not so important).
  3. Chrome-plated pipe Ø 25 mm (usually three meters on sale, so it will be better and cheaper somewhere to get the remains), 18 flanges for tubes.
  4. Three plastic, chrome legs.
  5. Melamine edge.

  1. Drill with a nozzle.
  2. Iron.
  3. Shoe knife
  4. Device for pasting edge.
  5. Sander.
  6. Jigsaw.
  7. Frezer with frezoy.
  8. Truborez.
  9. Rubber hammer.
  10. Wood screws (4 × 16) up to 70 pieces.
  11. Screwdriver.

Markup

Pre-prepare the shelves, making them radial. This we can do with jigsaw and grinding machine. Jigsaw cut off the excess, and place the cut process with a grinder. It is worth noting that such a tool as a jigsaw, mercilessly cleaves laminate when cutting. After grinding, these chips are practically removed. The next stage is the pasting of the flat ends of the shelves with a melamine edge. Then we will deal with the radius of the future shelves. We will need a milling cutter and a milling cutter, which at the end of a chipboard sheet cuts through a small groove, where we subsequently need to hammer in the T-shaped profile with a rubber hammer. Next, make a basting marker and drill 3 holes in the chipboard under the 25th pipe.

Holes are not drilled at all in the upper and lower shelves.

With a special pipe cutter, we cut to size the parts of the chrome pipe that we need. To the bottom of the shelves in advance fasten legs. Then we screw the flanges on the openings of the two shelves on both sides (it is better to do this before installing the shelves in the product) and thread the tubes. We fix them with special screws on the flanges and, one can say, the whatnot is ready. This corner piece with flowers will be a wonderful decoration for your corner.

Suspended shelf

Now it's worth talking about light-loving plants that need to be installed closer to the window or even to the window. Naturally, we will not talk about flowers, but about window shelves for flowers. Of course, your desire to arrange flowers on the window can be caused not only by the light-loving nature of the plant, but also by the structure of the growth of its shoots. They can be, for example, drop down or curly. In this case, it would be better to think about how to arrange these flowers higher. How to make a shelf for flowers in this case? For this you can use different materials.

Flowers on the window

You can also make the window hang potted plants. For this we need only a few anchor anchors with a hook of 8 × 60.

  1. In the upper part of the window we drill a hole with a perforator.
  2. Insert the anchor hook and screw it in clockwise until it stops.
  3. We tie ropes to pots. It is better if it is an ordinary fishing line. It is not so visible and durable enough. However, there is no limit for fantasy.

Hook anchor bolt

The anchor mechanism is arranged in such a way that when screwing in, the spacer part of it expands and, thus, sits quite firmly in concrete.

Glass shelf on the window

Flowers on glass shelves

And if we talk about literal window shelves, then the next option is especially acceptable for those who want to do everything, firstly, quickly, secondly, reliably and, thirdly, beautifully. It is clear that we are not talking about placing flower pots on the windowsill. It is cumbersome, inconvenient, and in some cases not very beautiful.

These shelves can be mounted if the window itself is wooden.

Arched arm (concave) In any furniture store where accessories are sold, you buy a chrome shelf bracket (it is called an arched, concave bracket). On the economic market, you can buy a 1.5-meter-high rack about 3.5 cm wide and about 1.5 cm thick. As a rule, there is a glass shop next to the market and if you know the exact dimensions of your future shelf, order 3 glass thickness along the way. mm with grinding in a circle. For beauty, you can choose any tint, and if you have children, it will be important that the glass is necessarily tempered. Such glasses when falling to the ground fly into small pieces with not sharp ends, and your child will not get hurt about them.

Next, measure the depth of the shelf holder and cut small planochas according to these dimensions. From below on small self-tapping screws we fasten these levels to arms. The tree in this case will serve as the lining material between the glass and the iron. Just be sure to ensure that the screws do not come out on the other side. Therefore, your fasteners must be of appropriate sizes. It remains the case for small: attach the brackets to the window frame. After that you can put shelves on top and make sure that we did everything correctly and the plane is strictly horizontal (use the building level for this). Shelves are not attached to the brackets, and will be pressed against flower pots. Convenience is that all this glass construction can be easily dismantled in case of general cleaning, when windows need to be washed.

Shelf options

As you have noticed, there are quite a few variations on the theme of the shelf for flowers. Which one you prefer depends on your taste and your abilities. The main thing is different: beautiful flowers will decorate your home, and beautiful original shelves made with your own hands will tell a lot about the owner and owner of this house. Therefore, let there be many flowers in your house.

This video is about making flower shelves for chipboard windowsill and pipes:

Learn how to make a multi-level wooden shelf-stand for flowers:

Shelves from chipboard on the window

Wooden shelves and chipboard

Flower shelves

Chipboard shelf with flowers

Flower shelf

Floor stand

Product with T-shaped plastic edge

Wooden carved shelf

Shelf layout options

Systems are both single and double. It all depends on the number of flowerpots. By location are distinguished:

  • floor standing
  • wall (straight and angular),
  • for balconies.

The unusual design of a flower shelf will give the room originality and brightness.

Rack for flowers is placed in a convenient place. In addition to his room, you can put on the balcony. And also the configuration is easily hung up in the yard or on windows.

Systems are both single and double.

We determine the design and construction

The easiest and most original configuration is the suspension system. In this embodiment, you can come up with any design and form. It can be built in the form of a tree or a branch. Such a masterpiece can be hung in any convenient place; it does not take up much space and looks harmonious in any interior. Unusual design solutions are very popular:

  • configuration in the form of a separate continent or a piece of the planet
  • honeycombs, rings, ovals (placed together, and separately),
  • "Ladders", "fir trees" or "twigs",
  • band-like.

Rack for flowers is placed in a convenient place.

On the Internet there are a large variety of options for wall and floor shelves. But before you start doing the option you like, you need to understand whether it will suit you. How to understand what kind of shelf for flowers needed?

The configuration is easily hung up in the yard or on windows.

To decide what you need, you need to know a few nuances:

  • the number of flowerpots to be placed on the surface
  • plant species
  • the interior of the room where the flower shelves are located,
  • desire and taste of the hostess.

Unusual design solutions are very popular.

These are the main factors that need to be paid first attention when planning a structure.

It is worth remembering that the shelves for flowers are: single, double and multi-seat. The number of places depends on the number of domestic plants.

In addition, to make the piece beautiful it is not necessary to paint it or attach something to it.

Single options can only place a pot. Such facilities are installed at home and on the street. Climbing home plants look good on them. Such type of shelves happens wall and floor.

Single options can only place a pot.

The second option is usually hung on the wall. Multi-place options can accommodate a maximum of 5-7 vases. Their big plus in compactness and large capacity.

If the only free space for furniture is the corner. It will not hurt us! There are special corner facilities that will help us. They will perfectly enter the corner and hold 5-7 vases. Furniture is placed on the walls and on the floors.

Nothing decorates your own home like handmade items.

Design a new shelf, you can choose any. Sections can be both rectangular and zigzag. Wall sections can be designed as a tree or a branch. If the sections are located on the street or balcony, they can be painted in a bright shade.

If the only free space for furniture is the corner.

Glass furniture will give the room style and elegance. It fits well into any interior. This option is well suited for small rooms, as things from glass do not take space, but due to their transparency, on the contrary, they expand the room.

What material is better to choose

There are several types of raw materials for the design of shelves:

  • metal,
  • plastic,
  • tree,
  • glass,
  • combined material.

Design a new shelf, you can choose any.

Metal constructions are very durable and can withstand a lot of weight. This configuration looks expensive and solid. But behind it you need special care and special treatment otherwise corrosion may appear and the shelves for flowers will deteriorate.

Plastic cabinet to build itself is almost impossible. It is ordered in stores or on the Internet. They are unpretentious and very convenient to use. Sections can be selected in any color. Since plastic is very flexible, crafts from it can have a different shape and size. They are easy to wash and move, as they are lightweight.

If the sections are located on the street or balcony, they can be painted in a bright shade.

Wood crafts are very popular. But in the operation of the furniture is not convenient. When watering plants, water often falls on the surface of the stand, the board, it can rot and swell. If you decide to build a shelf of wood, it must be carefully treated and well covered with a special surface varnish.

Glass structures have a simple exquisite appearance, but to build it is necessary to have experience with glass. They need special care. And on such coasters can not put a lot of weight. They are well suited if you need to place one or two pots.

Metal constructions are very durable and can withstand a lot of weight.

Combined sections include several components. This is usually wood with metal or glass with metal. Crafts have an unusual appearance. Can withstand a lot of weight by combining matter, and not very whimsical in cleaning.

The advantages of creating a masterpiece yourself

The main advantage is that such work costs much less than buying a flower rack in a store. For the manufacture of furniture will need a little patience, raw materials, which will be made crafts and tools.

The range of store stands is very small. Not all purchased good quality. Most often in stores and on the Internet the same type of lockers that are in every home. Some sections will not fit your interior or room dimensions.

She needs special care and special treatment, otherwise corrosion can occur and flower shelves will deteriorate.

Doing crafts with your own hands, you have the opportunity to choose the size, shade, design and location of the structure. New universal furniture will be only in your home.

Creating outdoor furniture for plants, it is possible to take into account the nuances of its placement. Build so that the rack under the flowers do not interfere under his feet, and he did not have to bypass. You can create a sliding or moving structure, which at any time can be moved to the right place.

Wood crafts are very popular.

To make a stand, it is not necessary to buy something in the store. You can build a stand from the old locker in the garage or unnecessary stairs.

Necessary materials

For the manufacture of classic shelves will need:

  • board made of wood, chipboard, mdf, plastic or metal,
  • plywood,
  • screws,
  • stubs
  • additional tools
  • decorating paint
  • varnish (when working with boards).

Combined sections include several components.

And also can be used additional tools for decorating designs. If outdoor furniture may need legs or wheels to fix the cabinet on the floor.

Required Tools

To build the configuration you need the following tools:

  • screwdriver
  • building level,
  • electric drill,
  • saw,
  • marking pencil
  • hammer,
  • screwdriver,
  • roulette,
  • ruler.

Can withstand a lot of weight by combining matter, and not very whimsical in cleaning.

The choice of fasteners will depend on the raw materials of the future configuration. The heavier the raw material, the more powerful the attachment is. If you plan to install a metal wall-mounted shelf for flowers, then you need to use a welding machine for fixing. Otherwise there is a possibility that the stand will soon fall.

Manufacturing process: step by step instructions

Before you begin to design wooden crafts, you need to make sure that the drawings are correct and the details fit each other. Это очень важно в том случае, если вы планируете шкафчик делать с дверцами или задней стенкой.

После того как материалы подобраны и сверены, можно приступать к основной работе.

For the manufacture of furniture will need a little patience, raw materials, which will be made crafts and tools.

Step-by-step instruction

The length of the boards should be selected on the basis of the space where the rack will be located. In width crafts should be rather big. It should be free to place a pot of medium or large size. To make the same distance between the shelves, you can put extra bars in the middle.

For the manufacture of crafts you need a regular drill with a large drill. In each shelf you need to make two holes. They should be parallel to each other. In general, it turns out, two holes for each piece. The hole should be free to enter the thick rope. If the holes are smaller, then there is a chance that the shelf will be fragile.

Doing crafts with your own hands, you have the opportunity to choose the size, shade, design and location of the structure.

  1. We pierce the rope

Almost everything is ready to design the stand. It remains only to thread a thick rope through the holes and hang the shelf for flowers. After the rope is pushed through all the holes, we tie a sturdy knot to the bottom of the product. From the top of the rope we make a loop so that you can hang the shelf.

After that, when all the main work is done, you can proceed to the installation of the finished product. Since almost all the walls in houses are made of brick or concrete, we need an electric drill to work.

To make a stand, it is not necessary to buy something in the store.

Make a markup on the wall where it will be located. Drill holes for fasteners and install it. Firmly fix the product on the fasteners. Now you can put pots with plants on it.

The final stage - decorating

Creating a rack, you can come up with your own product design. Picking up the right materials and spending a little time, you get a unique masterpiece!

The choice of fasteners will depend on the raw materials of the future configuration.

For example, a plastic product is a different palette. For original design, you can attach decorative handrails to it.

To decide what you need, you need to know a few nuances.

A wooden shelf covered with varnish and sparkles. This gives shine and shine to the product.

Glass shelves are often decorated with patterned metal elements.

In addition, to make the piece beautiful it is not necessary to paint it or attach something to it. It is enough just to place on it pots and beautiful pebbles, toys, shells. Furniture can also be decorated with various fakes and toys. Do not be afraid to experiment! Create new masterpieces and improve your skills! Rack for indoor flowers - this is just the beginning. Nothing decorates your own home like handmade items.

On the Internet there are a large variety of options for wall and floor shelves.

Making a simple wooden shelf

Bookshelf mounted with his own hands

Wood is the most convenient material for work. Wooden shelves are simple, complex shape, open and closed, vertical, horizontal and angular. Based on the basic version, you can assemble a shelf of several modules and give it the most incredible look. In order for the product to serve for a long time, it is necessary to choose the right wood: the boards must be perfectly flat, completely dry, without cracks, voids and traces of mold.

Wood for shelves

During the build process you will need:

  • hacksaw,
  • drill,
  • building level,
  • pencil and ruler,
  • boards 16 mm thick
  • stain,
  • varnish for wood
  • grinder,
  • screws, brackets, dowels.

As an example, a simple rectangular shelf 250 mm wide, 300 mm high and 1100 mm long is used.

Hinged shelf layout

Step 3. Processing blanks

Before proceeding with the assembly, each piece must be sanded, coated with lacquer and varnish. If it is planned to paint the shelf simply, the blanks are treated with an antiseptic primer - and the service life increases, and the paint more evenly falls.

Step 4. Assembling the product

The bottom board is laid flat on a flat surface. From the ends of the workpiece retreat by 8 mm and spend 2 flat lines parallel to the cut. Now on these lines, you need to mark two points at a distance of 5 cm from the edge, and drill holes there for screws. With the top blank do the same. When all the holes are ready, install the side blanks on the bottom board and tighten the screws. A second board is applied on top and the side walls are also fixed with screws.

Brackets are fixed at the ends of the side walls, holes are drilled in the wall under the dowels, self-tapping screws are inserted and twisted so that they protrude about 5 mm. The dowels must be placed horizontally strictly, therefore, a line is marked with a level before drilling. Now it remains only to fasten the brackets on the fasteners and hang the shelf. If desired, the back wall of the product can be hammered with a piece of plywood, and glass can be inserted from the front.

To make such a simple shelf more original, you can replace one side wall with a stump of a thick branch. To do this, choose a flat branch with a diameter of about 7-8 cm with a smooth clean bark, sawed off a piece of 28 cm in length, cut off all the side processes. Chock is treated with a primer, dried and varnished. Bark do not need to shoot. After the varnish has dried, the blank is inserted between the upper and lower plank and screwed tight with screws.

To make such a simple shelf more original, you can replace one side wall with a stump of a thick branch.

Based on this drawing, you can make different variations of wall shelves. For example, reduce the length to 400 mm and make 3-4 blocks at once. Then set them on each other in a staggered manner and secure among themselves with the help of metal plates. Or just fix them on the wall separately, located at a short distance from each other.

How to hang the shelves

Corner wooden shelves

Often, to save space, shelves are made angular, and they can be mounted both in the inner and outer corner.

Corner wooden shelves

Blanks are made according to the scheme described above, only the top and bottom boards consist of two elements, with the ends cut at an angle. The process of manufacturing such a shelf is quite simple:

  • the halves of the upper board are coated with glue on the ends and clamped with clamps,
  • repeat the same steps with the bottom board,
  • when the glue dries, all blanks are covered with stain or primer,
  • on the top and bottom of the workpiece note the lines of attachment and drill holes,
  • insert the side walls and fix them with screws.

Next, fasten the brackets and secure the shelf on adjacent walls.

Corner wood shelf

Original book shelves

Regiments of irregular shape are increasingly in demand, so if you want, you can try to collect something original. For example, used a bookshelf in the form of a simplified maze.

For the manufacture will need:

  • edged board 20 mm thick
  • wood glue,
  • clamps
  • roulette,
  • level,
  • hacksaw,
  • miter box
  • Sander,
  • stain,
  • furniture screws, screws,
  • decorative shelf holders.

If everything you need is there, you can start making the shelf.

Step 1. Markup

Boards lay flat on the table and carry measurements from the drawing. The height of the side walls should be equal to 268 mm, since they will be located between the upper and lower parts: the height of the wall + board thickness x 2 = 300 mm.

Step 2. Cutting boards

If the marking exactly corresponds to the scheme, you can proceed to cut. It is best to use jigsaw for this, then the cuts are perfectly flat and neat. You should have 2 long blanks and 2 short ones.

Step 3. Processing blanks

Before proceeding with the assembly, each piece must be sanded, coated with lacquer and varnish. If it is planned to paint the shelf simply, the blanks are treated with an antiseptic primer - and the service life increases, and the paint more evenly falls.

Step 4. Assembling the product

The bottom board is laid flat on a flat surface. From the ends of the workpiece retreat by 8 mm and spend 2 flat lines parallel to the cut. Now on these lines, you need to mark two points at a distance of 5 cm from the edge, and drill holes there for screws. With the top blank do the same. When all the holes are ready, install the side blanks on the bottom board and tighten the screws. A second board is applied on top and the side walls are also fixed with screws.

Brackets are fixed at the ends of the side walls, holes are drilled in the wall under the dowels, self-tapping screws are inserted and twisted so that they protrude about 5 mm. The dowels must be placed horizontally strictly, therefore, a line is marked with a level before drilling. Now it remains only to fasten the brackets on the fasteners and hang the shelf. If desired, the back wall of the product can be hammered with a piece of plywood, and glass can be inserted from the front.

To make such a simple shelf more original, you can replace one side wall with a stump of a thick branch. To do this, choose a flat branch with a diameter of about 7-8 cm with a smooth clean bark, sawed off a piece of 28 cm in length, cut off all the side processes. Chock is treated with a primer, dried and varnished. Bark do not need to shoot. After the varnish has dried, the blank is inserted between the upper and lower plank and screwed tight with screws.

To make such a simple shelf more original, you can replace one side wall with a stump of a thick branch.

Based on this drawing, you can make different variations of wall shelves. For example, reduce the length to 400 mm and make 3-4 blocks at once. Then set them on each other in a staggered manner and secure among themselves with the help of metal plates. Or just fix them on the wall separately, located at a short distance from each other.

How to hang the shelves

Corner wooden shelves

Often, to save space, shelves are made angular, and they can be mounted both in the inner and outer corner.

Corner wooden shelves

Blanks are made according to the scheme described above, only the top and bottom boards consist of two elements, with the ends cut at an angle. The process of manufacturing such a shelf is quite simple:

  • the halves of the upper board are coated with glue on the ends and clamped with clamps,
  • repeat the same steps with the bottom board,
  • when the glue dries, all blanks are covered with stain or primer,
  • on the top and bottom of the workpiece note the lines of attachment and drill holes,
  • insert the side walls and fix them with screws.

Next, fasten the brackets and secure the shelf on adjacent walls.

Corner wood shelf

Original book shelves

Regiments of irregular shape are increasingly in demand, so if you want, you can try to collect something original. For example, used a bookshelf in the form of a simplified maze.

For the manufacture will need:

  • edged board 20 mm thick
  • wood glue,
  • clamps
  • roulette,
  • level,
  • hacksaw,
  • miter box
  • Sander,
  • stain,
  • furniture screws, screws,
  • decorative shelf holders.

If everything you need is there, you can start making the shelf.

Step 1. Markup

On the prepared boards with a pencil under the ruler mark the cut lines. Measurements should be transferred very carefully, since all horizontal parts are of different lengths.

Step 3. Build the structure

The ends of the parts smeared with glue, tightly compressed and additionally fixed with furniture screws with slot. Conventional screws do not fit here. Each joint will require at least 2 screws. Both parts of the shelf are applied to the wall, placed on a level and marked with a pencil anchorage points. After that, they drill holes for dowels, fix brackets to the shelf with screws and hang the structure on the wall. Instead of brackets often use decorative shelf supports "pelican".

Non-standard shelves

Size chart wall shelf

Hinged shelf on belts

If you need a decorative shelf for small items, the next option is perfect - a board suspended from belts.

Hinged shelf on belts

For the manufacture of the shelf will need:

  • 2 edged boards 300x750 mm, 30 mm thick,
  • 4 leather belts 75 cm long
  • 4 long screws with plastic plugs,
  • 4 short screws,
  • building level,
  • ruler,
  • sharp knife
  • drill.

Step 3. Install the shelf

Slip a polished board into the loop and align it horizontally. To prevent the shelf from moving, the parts of the belts adjacent to the wall near the board itself are fastened with short screws. Now under this shelf hang another one, exactly repeating the steps described above. The result is a light and neat bunk shelf. If desired, you can add another 1-2 tiers.

For the manufacture of the shelves described above, you can use not only wood, but also plywood, as well as laminated chipboard. The latter option is used most frequently, since LDSP is of low weight, high strength, practicality and durability. When assembling shelves from this material, all sections are necessarily glued with a melamine edge to match the color of the sheet.

Hinged shelf with belts

Suspended shelf with belts

Glass shelf making

Glass shelves harmoniously fit into any interior, and the installation process does not take much time. For work you will need:

  • strained glass,
  • hammer,
  • electric drill,
  • building level,
  • aluminum profile,
  • dowels,
  • duct tape
  • ruler,
  • pencil.

Not everyone knows how to properly cut glass, and therefore it is better to order cutting blanks in the workshop. In the same place, they will perform grinding and polishing of the edges in order not to cut themselves on sharp edges when installing the shelf. Everything else can be done independently.

Step 2. Installing profiles

Holders for glass shelves

Profile for glass shelves

An aluminum profile is applied to the surface of the wall and the conformity of the fixing marks is checked. Then the dowels are inserted into the holes, the profile is baited with a single screw and leveled horizontally. After that, tighten the remaining screws.

Instead of the drill insert the screw bracket

Screw the bracket screw

Leaving the bracket screw protruding from the wall

Screwed bracket

Step 3. Mount the shelf

The rear edge of the glass shelf is covered with duct tape. You can use a separate strip of gaskets, placing them where the glass will touch the heads of the screws. The shelf is inserted into the profile, the edges of the profile are covered with protective caps. If the two shelves are in contact on the sides, their edges fasten with metal fittings.

Unusual shelves of scrap materials

If you have free time and a desire to experiment, you can create very unusual shelves on the wall from scrap materials. For example, the corner shelf of plastic pipes looks original. For its manufacture will need sections of sewer pipes and angle sgonki. The wall shelf is attached with screws with dowels.

Unusual shelves of scrap materials

Unusual shelves of scrap materials

Old suitcases and diplomats can also be excellent wall shelves. To do this, they are cut to a height of half, cover the back of the plywood and secured to the wall with screws or brackets.

Shelves of old suitcases

Drawers of unnecessary cabinets will fit perfectly for the manufacture of shelves. To give them an elegant look, the boxes should be carefully sanded, primed and painted in bright colors. Then they are leaned back against the surface, mark the attachment points and drill holes for them. Even one such shelf looks very original, and a composition of 2-3 drawers will become a real decoration.

An interesting shelf from a tree. Master Class

Original bookshelf do it yourself

It will take:
Rope,
Board at least 2 cm thick
2 corners (fastening) for shelves,
Steel washers,
Lighter,
Drill,
Saw.

With the help of a saw, we saw the board into several parts so that we have 2 bars of 6 cm each and 11 bars of 5 cm each

Now, with the help of a drill, we drill holes in existing bars

We stretch the cord through all the bars, using washers in the form of dividers (3 pieces each)

We stretch the cord through all the bars, using washers in the form of dividers (3 pieces each)

Flower shelves: species diversity

To decide on what forms and proportions to make a flower stand, help plan the location of plants in the room. Basically, in order to save space, they are trying to raise them on the walls or use hanging shelves for flowers, but this is not always possible. There are so large plants that they can be placed exclusively on the floor. This allows you to classify products as:

Further designs may vary in shape. They can be made:

Figured flower shelves

On subspecies divided shelves under the flowers and their capacity.

There are conventionally singled out single, double and multi-seat models.

The first are good in the wall version. Liana-like plants and small, bushy, densely blooming greens look great on them.

Wall single shelves for flowers

On double shelves of floor and wall type plants are placed with identical conditions of detention, most often of the family tree.

Multiplace models are universal. You can see such flower shelves on the wall, on the window, on the floor. На навесные модели желательно не ставить чересчур тяжелых горшков. Они могут не выдержать нагрузки и вывалиться с куском стены. А вот сделанная своими руками для цветов изначально рассчитана на серьезный вес.So if you arrange a greenhouse of large plants, it is only on it.

Multi-purpose floor shelf for flowers

Any of the considered structures can be assembled in an angular format. Thus, space will be saved, and design talent is demonstrated.

Lovers of climbing vegetation may like photo ideas of hanging flower shelves with ceiling mounts.

Suspended shelf for flowers

The classification is clear. And what are the flower coasters made of? You can collect them from any, sufficient strength, materials. Here and glass, and plastic, and plywood. But still, for many, the priority of choice remains the tree. Let's see the most interesting solutions.

Flower shelf on plywood wall

Probably easier and cheaper material for the manufacture of wall structures is not found. It is easy to cut out plywood of any size. And special skills to work with it is not required.

So where do they start to create a shelf for flowers with their own hands? Are you thinking from tool preparation? By no means. The creative process begins with the creation of a sketch. And here, on paper, you can pour out all your fantasies. Then there will be plenty to choose from. You can hang on the design of the future masterpiece for a long time, carefully working through all the details, but being carried away by the aesthetics it is important not to forget about the main purpose of the product. Wall shelves for flowers should be durable and withstand the expected load.

Wall shelves must be durable

The next step will be to create a design drawing, indicating the size and type of fasteners. We will transfer it to the plywood sheet.

To cut the workpiece most convenient electric jigsaw. At the finished web lines are cut cleaned. Thoroughly do it with sandpaper. Plywood is treated with protective impregnation to increase its moisture resistance and leave to dry.

Protective impregnation will extend shelf life

The final touch in the work on the wall shelf for flowers will be opening it with varnish. At will the product can be decorated. How?

1. Paste a beautiful self-adhesive film.

2. Paint it.

3. Decorate with rhinestones, beads, buttons, shells, etc.

In general, show the creativity of thought.

Carved plywood shelf

Fixed to the wall construction trying to the corners and brackets made of metal.

The same principle will be collected and the shelf on the window for flowers. It is fixed on the slopes of the window opening. It is interesting to look at the cascades of such small products.

Shelf on the window for flowers

From thick plywood it will be quite possible to collect and stand for tall plants in bulk pots standing on the floor. That's just when working with your hands on the floor shelf for flowers, it will be necessary to think not about fasteners, clamps, and the legs. For their role fit the usual pieces of the bar, sawn into neat cubes. For such a stand, stability will be very important, so it is better not to experiment and leave the design with all 4 legs, although their number may vary depending on the shape of the design. For example, a round, large diameter, shelf may be 8, and the legs are cut unusually - in the form of hockey pucks.

Plywood floor shelf

Plastic shelf for flowers on the windowsill do it yourself

Sounds like a pun, but the shelf under the flowers on the windowsill is made of ... a window sill. It can be found in finished form in hardware stores or purchased from manufacturers of plastic windows. In addition to the plastic sheet, you will need:

  • nickel-plated pipes
  • flanges,
  • brackets,
  • work tool.

Materials for the shelf of the windowsill

The window sill is cut in length into three identical-sized pieces. Then, in each blank, three holes are made into which the rack tubes will be inserted. They are arranged as follows: 2 holes at the edges of the back line and 1 in the middle of the front. The result should be a supporting triangle.

The next step in the work on the shelf for flowers with their own hands will be cutting pipes. Three details give the same length. We assemble the structure and fix the elements with flanges and screws. For greater reliability, the two rear pipes are attracted by brackets to the wall.

The shelves from the windowsill are very practical

Plastic shelf options are very practical. They are not difficult to care for, plus they are not afraid of water, which is very important in the case of flowers.

How is going to the corner shelf for flowers

For creation of a shelf of the angular form any materials will fit. Small structures in general can be built from their remnants and scraps.

The work itself, in fact, not much. The main surface is cut, for example, from chipboard. She can be given the shape of a triangle. For greater decorativeness, the base of the latter is made figured, more often - arcuately convex, although other options are not excluded. You can search for non-standard design ideas for the corner flower shelves in the photo.

Corner shelf for flowers

The question of further assembling and fixing the structure depends on its type accessory. If this is a floor option, then perhaps not the lonely shelf, but a full-fledged shelving will be the more relevant solution In it, the shelves can have the shape described above and be located one above the other at a required distance, or they can be given a rectangular shape. In the latter case, the structural elements will diverge on either side of the bearing support at right angles. It is interesting to look at the compositions where the shelves for flowers are fixed asymmetrically, like a ladder, a Christmas tree. Not bad to play on the size of the details. Thus the product is given the appearance of a pyramid. On the pyramidal structure will be able to put a whole cavalcade of different-sized plants.

Corner flower shelf

With hinged shelves for flowers, the situation is even simpler. They are simply fixed on decorative brackets. If you plan to make a multi-tiered model of a flower stand, then all the elements are assembled on a common stand, in which role is often a piece of pipe. A hole of a given diameter is made in each shelf, and one after another they are strung on a support. Fixing on the necessary level is carried out by flanges.

Wood flower shelves

Wooden shelves - the embodiment of reliability. Properly assembled and well-fixed structures are able to withstand significant weight loads.

And coasters are pleased with a variety of models. It is possible to construct from the tree both the simplest variants and the real exclusive. The desire to try to make a beautiful shelf under the flowers with their own hands after viewing the photo arises even among not the most creatively gifted personalities. And believe me, with certain efforts they will succeed!

You can make a shelf of any configuration from the tree.

Do you really need skills to varnish a piece of timber and fix it with metal corners on the wall? Even a schoolboy will cope with such a task.

There is a creative potential - change brackets for leather belts. Fold them in half and fix them on the wall surface, then simply put the paint-treated timber into the hinges. Such a hanging flower shelf is equally good on the window and on the wall.

Shelf for flowers on leather belts

You can complicate the task and make a two-tier or three-tier structure of the same type. Besides the fact that a large number of pots fit on the stand, its design will add individuality to the interior.

Unsuited wood trim is easy to assemble in the corner shelf for flowers. Blooming green with its brightness successfully diversifies the empty corner space.

Shelf for flowers on the belts do it yourself

Connoisseurs of exotic can combine wood with other materials. In addition to the colors, the compositions will look just great.

Combined flower shelves

The most popular combination is the duet of metal and wood. The wooden base, laid on a beautifully welded or forged metal frame, fits perfectly into modern interior solutions like a wall or floor shelf for flowers.

Metal and wood floor shelf

To create such an accessory you will need the skills of working with metal, so it will be difficult to assemble it with your own hands. It is better to order the model of interest to the specialist.

But this is not the only way to combine materials. Wood can be supplemented with leather, rope, glass. Glass, in turn, forms a wonderful pair with chrome-plated metal, and the latter interacts well with bright plastic. Take a closer look at the standard and shocking combined designs can be on the Internet.

Suspended shelf of boards and rope

Floating design

“Excellent wall shelves for flowers come from materials donated by nature.”

Very effective element of the situation. The shelf, together with the flower standing on it, seems to hover in weightlessness. It is really impossible to determine how miraculously it keeps on the wall.

There are several ways to make something similar, but if you are going to work on the original shelf yourself, use the Craig Jig system.

Craig Jig system for flush mounting of shelves

Excellent wall shelves for flowers are obtained from materials donated by nature. For example, try to refine and transform an attractive look not too large snag. It is cleaned of bark, treated with protective compounds, stain or varnish, after which flat sections from a stump or a thick branch are fixed on wide knots. Attaching an improvised shelf on the wall, it is additionally decorated with paper butterflies, fabric flowers. The logical conclusion of the composition will be put on the stands of green plants.

Original shelf of snag

Thread theme

For imaginative people, natural materials are just a store of unique ideas. Look at the photo gallery of flower shelves, and you will see that they really make the most successful elements of the interior.

Work on them is not so much, and that is not difficult. The snags found after the windbreak will just need to be slightly corrected, trimmed to emphasize the existing shape and simply complement the original stand, or perhaps the decor.

Found snag need to be cleaned and processed

Wonderful will be a floor shelf for flowers collected from the remains of trees with your own hands. Depending on the type of source material, the product may have a stand or rely on a natural basis. According to one version, the accessory is assembled from several, average thickness of branches, which, after polishing and varnishing, are installed on a plywood base. Pots of flowers can stand in real, twined from the vine nests, fixed in the interlacing of branches, or on supports made in a geometric form. The latter are firmly fixed to the branch cut.

Flower shelf of boards and snags

The second version of flower shelves can hardly be called an accessory, as it is a full-fledged element of the room's decor, which is not just a stand, but an entire composition. The basis here will be the stem of the tree with a branching system. Branches are cut so that they have the opportunity at different levels to fix the shelves under the flowers with their own hands. There should be a lot of such coasters and they should not be too big. When plants are displayed on them, the effect of a living tree should appear.

Shelves on the branches of the cut tree

A chain is wound around the trunk, on which a cat carved out of wood will be planted. You do not want fairy tales - supplement the composition with paradise birds, seated on branches, or implement other design ideas.

What and with what to work

For the main part, you can take a new wooden cutting board, a piece of furniture board. They give the conceived shape and grind. To assemble a flower shelf with your own hands, you need to stock up:

  • screws,
  • furniture wheels
  • sandpaper
  • a screwdriver
  • a pencil
  • ruler.

Stand on wheels will help move heavy vases

The entire complexity of the procedure comes down to the correct fastening of the wheels to a wooden base. Since the stand will be a massive thing, it is important that the design as a whole was monumentally stable.

Shelf options on wheels

To achieve the desired effect will help markup. We turn the future shelf under flowers upside down and divide the surface into 4 equal sectors. Now it is necessary to expand the wheels in each sector so that their attachments are at least 1 cm from the edge. Outline the screw-in points of the screws and fix the moving mechanisms to the shelf. Accessory is ready to use.

Economy option of a multi-level shelf

“Fixed this type of hanging shelves for flowers can only be on wooden window frames”

The design is easily assembled even with female hands. Let's try together to make a shelf on the window for flowers? It is necessary to prepare several boards, the length of which is slightly less than the width of the window opening, several self-tapping screws and a fabric belt. What is the last one? This is a dense tape that goes to the manufacture of the reins, dog ammunition, insurance.

Fastening tape to the shelf

Fixed this type of hanging shelves for flowers can only be on wooden window frames.

How much to buy tape? Calculations will help produce the formula: 4VP + 2SPD + 10cm. The abbreviations are as follows:

  • VP - the distance from the point of fixing the ends of the tape to the shelf,
  • SD - shelf width,
  • 10 cm is the minimum margin required for hemming.

If it is too difficult, take measurements empirically.

When all the elements are assembled, it will be necessary only to form a shelf for flowers with your own hands. For this:

  • nylon tape cut in half,
  • add each formed part in half:
  • gently bending the ends, fasten the resulting parts to the window frame.
  • we lay in loops a board.

Boards are laid in the loop

In order to make a multi-tiered construction, the tape is stitched across at the calculated distance and the following “floors” of boards are laid. Let us assume another multi-layered fixation option, in which new loops are made of tape, but of shorter length and they are inserted inside the strips supporting the first shelf. The simplicity of the accessory will have to court in the interiors of rustic style. By the way, it will be possible to hang such a shelf for flowers on the wall, on the balcony, on the veranda.

Tiered shelf for flowers

For more stylish furnishings, the option can be improved and instead of boards use a plastic tray, for example. On it fine succulents will perfectly feel, and it will be more convenient to you to look after them.

Luminous wall shelves for flowers

Do you think that now we will talk about mounted structures with LED lighting? Do not guess! There is a much more interesting and tempting option to transform a simple stand code flowers into something non-trivial, mysterious, alluring.

Add to the interior of the magic is simple. Prepare an assortment of polyester resins with the addition of pigments with a fluorescent and luminescent effect and a relief board.

The word “relief” refers to a board of low quality: in knots, notches, covered with a network of deep cracks. Well, if it is in an unusual form. That is, not just a smooth rectangle, but let's say something abstract, amorphous, uncut.

Luminous wood shelf

Further, the future hinged shelf for flowers is placed on an absolutely flat, level-measured surface and they begin to fill it with resin mixture. It must fill all voids and irregularities without going beyond them. After pouring, the cracks are sealed with tape, and work on the workpiece is suspended until it is completely dried.

Filling cracks resin mixture

Then the grinding stage will follow. Protective tape is removed and the surface of the shelf under the flowers gently, in light movements, processed with fine emery paper.

Finishing the product varnishing. It is covered with nine layers of fixing varnish.

It remains to fix the structure on the wall and wait for the evening to see how it will shine.

The surface is covered with nine layers of varnish.

Wall shelves for flowers in this design will look great in futuristic interiors, as well as children's rooms.

Hanging Gardens

And it is also possible to implement! There are many ideas on this subject. For example, to the vegetation exhibited on the window-sill, add a hanging flower shelf, assembled with your own hands, and fill it with drop-down windmills. Looks good on a cascade of single suspended shelves. The same designs adorn the corners and narrow niches where wide shelves do not become. Hanging festoons can be an interior solution for a high-ceilinged porch and loggia.

Cascade of single suspended shelves

Suspended shelves for flowers, especially hand-made, are a versatile accessory that fits into the decor of rooms of any stylistic orientation. They can be transformed into ergonomic multi-tiered structures. When you save space, you get a chance to keep in the house as many plants as you want. In such a flower staircase there can be 8 or more steps. However, the more complicated the design of the flower shelf design is, the more accurate the engineering calculations should be. Согласитесь, неудобно будет пользоваться вещью, если она будет раскачиваться, выворачиваться, перекашиваться.

Подвесные полки подойдут для интерьера в любом стиле

Не в фаворе и слишком высокие конструкции. Возникнут сложности с уходом и поливом. Без хорошей стремянки с проблемой не справиться. Да и при наличии лестницы в доме карабкаться по ней ежедневно – удовольствие сомнительное.

Not the best way things are with too wide shelves. There is no way to reach the last rows.

Wherever you do the shelf under the flowers: on the window sill, in the corner, on the wall - do not be lazy to sketch her drawing first, then you will be able to analyze the invented construction in detail and make it really reliable for ages.

Hanging gardens are in demand in interior design. Them make rest corners and halls, decorate loggias. Assemble the wall multi-level corner shelf for asymmetrical or symmetrical type colors. Arrange ornamental plants with beautifully falling crowns on their steps, place a couple of armchairs with a coffee table on their background, throw a soft carpet imitating a zebra or leopard skin at your feet and now you are almost in the tropics!

Hanging gardens are in demand in interior design.

A similar picture can be drawn on the background of the shelf for flowers, constructed from a pallet or part of it. To give it a domesticated look, wood is polished, painted, or covered with wood stain and exposed with a non-shiny varnish. The design will be a good complement eco and ethno-interiors. In a company with succulents, such a still-life inspires memories of the Wild West.

Flower shelves from a pallet

Original floral shelf in the kitchen

You can't even imagine what professional designers offer you to work with. Want a stylish decoration in the kitchen - take the beer bottles, boards, screw-in fasteners of brackets with links, and for the cause! To make it clearer what it is about, look at the photo of such a shelf for flowers on the Internet. Three of the six boards are drilled in 4 holes of such a diameter that bottlenecks pass into them. It should look like the legs at the table. It now remains to collect all the details in a single unit.

Bottle and wood shelf

Bottles put on one board, on top of the neck we put on the second and fix the resulting brackets. Fasteners must be installed so that they hide between adjacent bottles. How many do these tiers from the shelf for flowers on the wall decide for yourself.

Shelf assembly materials

In addition to the wall construction, you can build an additional shelf for flowers on the window sill, just make it white and give it the appearance of a diverging staircase.

We will engage the boxes

If there are several wooden boxes of vegetable type in the house, then you can also assemble a magnificent ensemble from them. They should be sanded, sealed and fixed on a stand made in the form of a three-step sliding ladder. On this shelf, ivy and indoor grapes, heder and campanula will look great.

The shelf for flowers from a box

Rules for the location and filling of shelves

“Get away from the standards, because you can do your own flower shelf on the windowsill, wall and floor from any stick”

In addition, the shelves for flowers need to be collected by hand, they must also be adequately placed in the space of the rooms. Simple rules will help to harmonize green shoots in a homely atmosphere. What should be remembered when organizing green oases in the house?

If your heart is given to decorative flowering varieties of plants, then it is better to settle them on a wide floor shelf for flowers, as an option, collected by yourself. However, it should not be done under the ceiling, otherwise instead of the rainbow effect there will be a feeling of distortion of space. Leave it at a level not exceeding half the height of the room.

Adherents of longline shelves should follow the guidelines for composition. The higher the plant, the shorter it should be. Therefore, the most magnificent and voluminous individuals occupy the lower shelves, and the smallest - the top.

If the shelves for flowers are made with your own hands, you should take care of the reliability of their attachment, and in the case of floor options, also stability. This is triple important when there are kids and animals in the house.

Take care of the reliability of mounting shelves

In the case when several plants are supposed to be placed on the shelf at once, the group should select species with identical care conditions.

Get away from the standards, because you can do your own flower shelf on the window sill, wall and floor from any stick. It is enough to edit and decorate the snag with cute details that emphasize the natural origin of the accessory. It can be figures of bugs, moths, bees, applications. Imagine and create copyrighted masterpieces. Perhaps this will be your hobby and profitable business.

Yes, and in terms of filling options are possible. Who said that on the wall shelves for flowers only place plants? In the library, for example, books, candlesticks and portraits of geniuses can join them. In the bedroom, family photos will compose a group of flowers. In the living room - statues and original vases. In the lobby - mini reproductions. In the nursery - toys.

Place the decorations on the flower shelves

Flower shelves are not exclusively an interior item. The range of their application is not limited to four walls. The presence of spacious balconies and balconies allows you to organize them full greenhouses. Summer residents of flower shelves and racks make out flowerbeds. For their role go: bicycles, barrels, old garden stairs, dressers, sinks, suitcases and other dacha-garret good. As a hanging flower shelves can be used: watering can and samovar, as well as all the old utensils, which have no direct application in the economy.

Shelves will help organize a greenhouse on the balcony

From decorated in a similar style of green corners breathes inimitable comfort. Hand-made shelving designs are the center of a small floral paradise and evoke a constant feeling of tenderness with the simplicity of their decision.

How to make a shelf for plants from a tree?

There are many options for such products, choose the one for which you have materials. You can make a high shelf or not.

Notice how beautiful this looks. Here you put a few flower pots, each plant will be illuminated by the sun. To make such a miracle, you will need:

  • plywood,
  • jigsaw,
  • acrylic or oil paints,
  • tassels,
  • self-tapping screws
  • boards,
  • roulette.

First, on the sheet of plywood you need to draw with a pencil the outlines of the sides of the future flower girl. On the reverse side they are wavy, with the one where the shelves will be located you need to draw parallel segments.

Saw the picture with a jigsaw. Mark the distance from one edge of the shelf to the other, based on this figure, file lengths of such length.

Paint them and plywood sides in white. When the coating is dry, with a stencil, you can apply a pattern with other paint on the plywood. When it dries, then attach the boards to the sawn straight parts of the plywood with self-tapping screws, while on one and the other side of each shelf you need to screw in two self-tapping screws. The work is completed.

If you do not have a jigsaw, do not know how to work with them, or you are looking for a simpler option, then another regiment will do.

To recreate this model, use:

  • boards,
  • bars of small section
  • paint,
  • brush,
  • little corners
  • self-tapping screws.

Here's how to make a shelf for flowers, so that it was a three-step, down on the windowsill you can place the plants under the lower tier.

Saw the first plank so that it becomes as long as the window sill or a little shorter. The second tier will be above it. You can make this element the same length as the first one or cut by a third or half. The size of the top shelf is also determined independently, depending on how many flower pots need to be placed.

Pick up the bars of such length that they were above the planter together with the plant planted in it, add a few more centimeters so that the flower does not rest on the shelf above it and is well lit.

As you can see, on the right and on the left the shelf rests on the base of the bars, assemble each of the 4 slats, connect them with flat corners and self-tapping screws. The left rectangle is high, fasten one more bar across it, then attach the shelves here, using the corners of the screws.

On the right side, the middle shelf rests on two vertical bars, and the top one. Fasten all the elements well, then leave the same color shelf or color. After it dries, you can install the plants and enjoy the vacant place.

If you do not have wide boards, this is not a reason to give up. Use subtle, having studied the next master class. As you can see, the height of this shelf for flowers is 1 m 20 cm, its length is the same, and its width is 28 cm. The distance between the shelves, depending on the height of the plants, is 35–40 cm.

Here is a list of materials and tools that will be required:

  • dostochki,
  • bars with a section of 20 cm
  • roulette,
  • self-tapping screws
  • saw,
  • wood stain or varnish for wood.

The sequence of works:
  1. Lay two bars on the work surface in parallel, at a distance of 28 cm, if they are of different lengths, cut them to become 120 cm. Attach three bars 28 cm long at the same distance at the same distance.

    If some flowers are large, others are not, then arrange them in height, make some shelves more spacious in height, and others less.

    Saw the board to make it 28 cm long or as large as your window sill. For one shelf you will need 2 pieces.

    Put them parallel to each other. Place perpendicular plank 120 cm long on top, tamp them on these two rivers, attaching from one side and the other.

    Attach these shelves with self-tapping screws on the transverse bars that are on the vertical racks.

  2. Cover the wooden parts with wood stain or wood varnish, wait until they dry. Now you can arrange the plants.

If you need to quickly make a shelf for flowers, then take:
  • two belts for bags
  • 8 nails
  • wooden board
  • saw
  • hammer.

Saw the boards of the same length, if you wish, you can paint them or leave them in such a way as to give the effect of antiquity. Use the adjuster to make the length of the belts the same. Attach each to 1 and 2 boards from two sides, nailing here. Then you can arrange flowers and other interior items.

The rack for flowers from plastic, glass

This model will allow you to place a lot of small pots with violets, rooting cuttings and leaves. To make such a shelf for flowers, you need:

  • plastic window sills,
  • nickel or galvanized pipes,
  • two brackets
  • nine flange mounts.

If you have one long plastic window sill, then cut it into 3 identical pieces. If there are several of the same size, then you will use them. Using a special nozzle on the drill, make three holes in each shelf. In this case, two should be near the corners, in the third in the middle near the other side of the plastic sill.

Thread through the holes in the pipe, fix the construction with shale fasteners. If the bookcase stands near the wall, then attach to it to fix the shelf. In this case, the plants will need lighting, using small screws to attach fluorescent lights or phytolamps under each shelf.

A great option is a shelf bookcase with glass bars. They will pass light, which is so necessary for plants.

You can fix glass elements on nickel or galvanized racks with flange mounts.

When you walk in the woods, you can grab a few bark billows, whimsically curved branches, to make them a beautiful flower stand.

Clean them of bark, dirt, sand with sandpaper. Assemble the composition, seeing how to connect the fragments, where to place the stand. Combine snags, branches with bolts and screws, pre-drilled holes. Plywood cut the circles, fasten them to the branches with self-tapping screws.

If you have wooden crates, then the shelf rack might look like this. The base is made according to the type of ladder, then the boxes are fixed on it.

If you have balusters on the farm, then make just such a carved bookcase.

Even a wooden pallet can be turned into a shelf for flowers. Use it in whole or in part.

And here is another great way to use the snags found in the forest. The base for such a flower stand, the shelves are made of plywood. Then the product is covered with yacht varnish.

We make a rack for seedlings with their own hands

Begins its cultivation. Seasoned gardeners know how often there is not enough space to sow the seeds of various crops. Therefore, vertical shelves will be an excellent solution.

You can buy a rack of plastic to place on it all the containers and cups.

If you wish, you can paint the boxes to make the design look festive. Or take ready-made color storage containers.

In this case, 4 drawers were used, for them you will need 12 hose lengths of 15 centimeters. Cut it with shears or scissors.

Put the first box on the four rods. To prevent them from getting out of the hole, attach one bottle of wine to each place. If they are not available, then you can cut off the pieces of the branches, pass the rods through the side grooves of the plastic boxes, hammer these pieces on their ends.

Now install one piece of hose on each rod, put the box on top, then the hose sections again go, then the plastic container. Thus collect the entire structure, put it on the window sill. Such a rack for seedlings will help save space and will be made according to your individual measurements.

The room must be periodically ventilated. To prevent seedlings from freezing, place cardboard pieces on the side to eliminate drafts.

And in the presence of balusters, make a shelf of them and wooden boards. On such a lot of seedlings will also be located. Sometimes the rack can be rotated 180 degrees so that it does not stretch in one direction.

The next option is one of the easiest. To embody it, take:

  • three boards
  • rope rope
  • wide drill drill,
  • optionally - wood treatment agent.

Drill the same holes in all three boards. Assemble them with a rope rope. As you can see, on the back of the structure you need to tie knots. Hang the seedling rack and it will be well lit by the sun.

Drill 4 holes in each board so that the bottlenecks pass through, screw in the fasteners.

Assemble the construction of two boards and 4 bottles, fix it with brackets.

If you make three such fragments, then you get a wonderful shelf or rack for seedlings.

But the next idea is very simple. Even a beginner can make such a rack for seedlings of flowers.

It is enough to fix the two brackets on the wooden window frame, fix the pre-painted board on them.

With the help of the same elements you can make corner shelves.

Making flower stands: a detailed master class

Using the submitted drawings, make a piece, transfer its shape to plywood, cut it, polish the edges.

Pencil mark on the lower platform a place where the bolts will be attached, drill holes in the drill. On the elements of the rack you need to determine where the flanges will be, make holes with a diameter of 2.5 cm. Apply putty on the workpiece shelves, when it dries, sand these surfaces with a machine or manually using fine emery paper. Paint the shelves in the desired color, apply two layers alternately, letting each one dry. Now glue the edging at the ends of the plywood shelves.

With the help of a pipe cutter, we need to get: three tubes 1 m long 20 cm, one 60 cm, and another 90 cm.

Using flanges on the lower platform, fasten all the tubes and screw them to the base with screws.

In the same way secure the second and all subsequent tiers.

To move the flower stand, attach the wheels, if this is not necessary, then fix the furniture supports on the bottom structure with self-tapping screws.

Here are how many ways to make shelves, shelves, flower shelves and seedlings. But this is not all ideas that you can use. If you want to know more about this topic, then open the video player.

The first plot for those who have the skills and tools to work with metal. You get a beautiful openwork stand for flowers.

Here is another interesting and quick idea.

From the third video you will learn how to make a rack for seedlings.

Pin
Send
Share
Send
Send

lehighvalleylittleones-com